Although it has fewer features than other competitors in the market, it provides exactly the level of security you need in real time, with minimal impact on program and application execution.

Viper

Thanks to these award-winning and effective antivirus programs, you’ll have no more problems with your device.

2. Delete problem file

  1. Go to the download menu as described above.
  2. Select Troubleshooting > Advanced Settings > Command Prompt.
  3. When the command line opens, type the following, one by one:
    • C :
    • WindowsSystem32LogFilesSrt CD
    • SrtTrail.txt.

After opening the file, the following message should appear: The critical file c:windowssystem32driversvsock.sys has been loaded corruptly. (This may seem different to you).

Now you need to find out exactly what this problematic file does. In our case, z. B. vsock.sys is a file that belongs to a third party application called VMWare.

Since it is not an operating system file needed for Windows 10, we can delete it.

To delete a file, go to the specified location on the command line and type the del command. In our example, it would look like this:

  • cd c:windowssystem32drivers
  • del vsock.sys

Again, this is just an example. You may need to go to another folder and delete another file. Before deleting a file, make sure that the file you want to delete is not the main file of Windows 10, otherwise you may damage the operating system.

Once you have deleted the problem file, restart your computer and delete the program that caused the problem (in our case it was VMware, but in your case it may be another program).

3. Disable automatic recovery at startup

  1. When you run the startup options, select Troubleshooting > Advanced Options > Command Prompt.
  2. Type the following and press the Enter key to execute:
    • bcdedit /set {default} recovery enabled No

Once you have done this, you should disable the boot repair and you may be able to access Windows 10 again.

4. Restore the Windows registry

  1. Wait for the start parameter to appear and execute the command line.
  2. Type the following on the command line and press Enter to execute it:
    • copy c:windowssystem32configRegBack* c:windowssystem32config
  3. When prompted to overwrite the files, type all the files and press the Enter key.
  4. Now type Exit and press Enter to exit the command line.
  5. Restart the computer and check if the problem has been solved.

5. Check the device partition and osdevice partition

  1. Under Boot Parameters, launch the command line.
  2. Type the following and press the Enter key:
  3. Find the values of the device partition and osdevice partition and make sure they are in the correct position. On our device the default and correct value is C:, but for some reason it may change to D: (or another letter) and cause problems.
  4. If it is not set to C: type the following commands and press Enter after each command:
    • bcdedit /set {default} device partition=c:
    • bcdedit /set {default} osdevice partition=c:
  5. By default it should be C:, but if Windows 10 is installed on another partition, you should use this partition letter instead of C.
  6. Restart the computer and check if the problem has been solved.

6. Performing an update or reset

  1. When the Start menu opens, select Troubleshooting.
  2. Choose between the options Update or Reset.
    .
  3. Follow the instructions to complete the process.

If the problem persists, you may need to perform a reset or update. This will uninstall the installed applications, but the installed universal applications and settings will be saved when you select the Refresh option.

On the other hand, the reset option removes all installed files, settings and applications. If you decide to take this step, it is advisable to back up your important files.

You may need Windows 10 installation media to complete this process, so make sure you have it.

How do I repair the Windows 10 Auto Recovery Cycle without a disk?

1. Check the boot priority in BIOS.

If you want to repair the automatic repair loop of Windows 10 without a hard drive, check that the boot priority is set correctly in the BIOS. In this case, you may need to go into the BIOS and change these settings.

To do so, follow the steps below:

  1. Press and hold either of the following keys while the computer boots up: F1, F2, F3, Del, Esc. Normally a specific key is pressed to enter the parameter.
  2. Look for the download section.
  3. Make sure the hard drive is installed as the first boot device. If you have multiple hard drives, make sure that the drive on which Windows 10 is installed is the first boot device.
  4. Save the changes and exit the BIOS.

Users have reported that Windows Boot Manager is sometimes set up as the first boot device, and that this may prevent Windows 10 from auto-repairing the PC loop to the computer.

To fix this, make sure the hard drive is set up as the first boot device.

You can now update your BIOS and benefit from greater stability and new features.

2. Remove the battery from the laptop

Some users have reported that they repaired the Windows 10 Auto Recovery Loop without a hard drive on a laptop by simply removing the battery from the computer.

After removing the battery pack, reinsert it into the notebook, plug in the power cord, and check to see if the problem is resolved.

3. Reconnect the hard drive

In some cases, Windows 10 Auto Repair cannot fix the PC error that can be caused by the hard drive and is the only solution to reconnect it. Turn off the computer, unplug the power cord, open the hard drive and unplug the power cord.

All you have to do is connect the hard disk, plug in the power cord and restart. Several users have already reported that reconnecting the hard drive has solved this problem, so you may want to try it.

We need to mention that this step violates your warranty, so keep that in mind. If you have more than one hard drive, repeat this procedure for each hard drive.

If you have more than one hard drive, you may need to turn off only those hard drives that do not have Windows 10 installed.

Hold only one hard drive (with Windows 10 installed) on your computer and try running Windows 10 again. When the problem is resolved, reconnect the other hard disks.

If Windows does not recognize the second hard drive, you can solve the problem in a few simple steps.

4. Clear RAM

A few users reported that they were able to correct the Windows 10 auto recovery cycle by simply erasing their RAM. To do this, turn off the computer, unplug the power cord and remove all memory modules.

Put the memory modules back in the computer and check if the problem is solved. If you have two or more RAM modules, try removing only one RAM module and start the PC without it.

Depending on the number of modules you have, it may be necessary to repeat this step several times.

5. Remove additional USB memory sticks

It has been reported that it is sometimes possible to fix a situation where the automatic recovery of Windows 10 could not solve a computer problem by disconnecting the USB drives from the computer.

If you have additional USB sticks, unplug them from the wall outlet and check to see if the problem is resolved.

If you reconnect it and Windows does not recognize it, see these simple instructions.

6.  Changing the hard disk drive operating mode in BIOS

Windows 10 Auto Repair Loop without Disk can be repaired by going into the BIOS and changing some settings.

After entering the BIOS, find the drive controller mode and set it to Standard (IDE, SATA or Legacy) instead of RAID or AHCI. Save the changes and restart the computer.

If the problem persists, try changing the mode again. If this does not solve the problem, reset the disc control mode to its original value.

7. Switch on NX, XD or XN in BIOS.

To enable this option, enter the BIOS and click on the Security tab. Find the XD (No-execute Memory Protect) bit and set it to Enable. If you do not have the XD option, search for NX or XN and activate it. Save the changes and restart the computer.

8. Carrying out a clean move

  1. Download the multimedia creation tool to the replacement computer.
  2. Insert a blank DVD or connect a compatible USB stick (4 GB).
  3. Start the media creation tool and accept the terms of the license.
  4. Select Create an installation media (USB stick, DVD or ISO file) for another PC and click Next.
  5. Select the language, architecture and edition of your choice, then click Next. Select the version for which you have a license key.
  6. Select USB stick or ISO and click Next.
  7. After downloading the installation, you can continue the process via USB or burn the ISO file to a DVD and continue from there.
  8. When everything is in place, restart the computer.
  9. Press F11 (depending on your motherboard, F12 or F9 or F10 may also work) to open the boot menu.
  10. Select the USB stick or DVD-ROM as the primary boot device. Save the changes and restart the computer.
  11. From there, your Windows installation files should start to load. Follow the instructions and you should have a brand-new system up and running in no time.

If none of the above solutions has worked and you can confirm that the hardware is working properly, we can only advise you to perform a clean system reinstallation.

We are aware that this is not a good solution because you will lose all the data stored on the system partition. But if something goes wrong, reinstalling the system is a last resort.

If you are not sure how to reinstall and restart Windows 10, follow the steps above.

Do you want detailed installation instructions? Here it is with a few more bug fixes.

The failure of the automatic repair of Windows 10 to fix the error of your PC is one of the most serious errors and can make your computer almost unusable. We hope you have solved the problem with one of our solutions.

Tell us how your solution worked in the comments below!

FAQ: More information about automatic repair

  • What causes an auto-repair loop?

One of the main causes of the problem with the automatic repair loop of Windows 10 may be the corruption of ISO files in Windows 10. But here’s a handy guide to troubleshooting.

  • Will the automatic deletion of files be restored?

You will not lose any data when you perform an automatic repair of the device.

  • How can I solve an auto repair loop?

Repairing the car repair loop requires a little patience and a little computer knowledge. But we have put together a comprehensive guide to help you.

Do you still have a problem? Fix them with these tools:

This software corrects common computer errors, protects you from file loss, malware and hardware errors, and optimizes your PC for maximum performance.
Troubleshoot PC problems and remove viruses in 3 easy steps:

  1. Download this much appreciated PC recovery tool from TrustPilot.com (you can download it from this page).
  2. Click the Start scan button to scan for Windows issues that may cause PC problems.
  3. Click on Restore All to solve problems related to patented technologies (exclusive discount for our readers).
  • Restoro has been downloaded by 0 players this month.

Editor’s comments : This article was originally published in March 2016 and revised and updated in December 2020 for timeliness, accuracy and completeness.

preparing automatic repair windows 8,linx preparing automatic repair,automatic repair not starting,surface pro automatic repair loop,cyberpowerpc automatic repair,diagnosing your pc windows 8,What causes an automatic repair loop?,,One of the main reasons for the Windows 10Automatic Repair loop issue might be the corrupted Windows 10 ISO files. But here is a useful troubleshooting guide.,Does automatic repair delete files?,You will not lose any data if you perform an automatic repair on your device. ,How do you fix an automatic repair loop?,Fixing an automatic repair loop takes some patience and a bit of computer literacy. But we've prepared a full guide to help you out.,You will not lose any data if you perform an automatic repair on your device.,windows 10 1909 repair loop,deep freeze windows 10 automatic repair,system image backup (sib) solution,automatic repair windows 10 black screen,free windows image,windows automatic repair bsod,windows 10 automatic repair help,sony vaio automatic repair loop,srttrail txt windows 10 fix,windows 10 automatic repair loop reddit,windows 10 unsupported processor boot loop,windows 10 automatic repair loop uefi,windows 10 automatic repair loop 2018,bootrec /fixboot access denied,alienware preparing automatic repair loop,automatic repair loop ssd,windows 10 automatic repair freeze,automatic repair not loading,parallels preparing automatic repair,windows 10 freezing on automatic repair,automatic repair windows 10 problem,windows 10 automatic repair loop no safe mode,windows preparing automatic repair boot loop of death,windows 10 automatic repair loop (2020),windows 10 automatic repair loop 2019,windows 10 automatic repair black screen,automatic repair couldn't repair your pc windows 10,disable automatic repair windows 10,preparing automatic repair windows 10,windows 10 startup repair not working

You May Also Like

7 Future Smartphone Trends |

The cell phone was originally developed in 1973 by a senior engineer…

FIX: Vivaldi update check fails

In this article, we will look at some of the best ways…

Learning Network Security Monitoring  |

Computer network security includes the policies, strategies or procedures implemented by network…

Install Xfinity Stream on Firestick & Fire TV Guide 2021

Discover the installation of Xfinity Stream Firestick and Fire TV. Don’t worry…