If you are in possession of the Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GN smartphone and also want to customize it, then you have come to the right page. If you are an Android enthusiast and want to perform TWRP recovery on your beloved device, then you have come to the right page. We will soon explain the TWRP installation process and rooting the Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN.

The Samsung Galaxy J5 LTE transformer has the following specifications: Qualcomm MSM8916 Snapdragon 410 (28nm) chipset, 1.2GHz Cortex-A53 quad-core processor, 5.2-inch screen, 74.5cm2 (~70.7% screen-to-phone ratio), 16GB internal storage/ 2GB RAM, 13MP main camera, f/1.9, 28mm (wide), autofocus, 5MP auto camera, f/1.9, 3100mAh lithium-ion battery, removable.

The TWRP is characterized by its material design and attractive user interface (UI). If you follow this guide, you will be able to install the latest version of TWRP for the Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN. You can download TWRP Recovery from the links in the sample section of this article. Please note that this is an official TWRP recovery and only for the Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN (Confirm the model by going to Settings> Startup). The process described below is only for rooting and installing TWRP on Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN, do not try this method on any other device.

If you want to exploit the full potential of your Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN hardware, the main task is to run and flash the TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a root device, as well as a flashed TWRP recovery, you can install any custom ROMs, modules, kernels, Xposed, etc., as well as many applications that require root access to function properly.

READ ALSO how to root Samsung Galaxy on SM-G5510 and install TWRP recovery

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is an open source community development project. Flashing TWRP allows your device to install any firmware, boot your smartphone, modify zip files for settings, Xposed modules for settings, one-click root processes and provisioning processes. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily delete, cache, and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.

To install the TWRP, your Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GN phone must have an unlocked bootloader. This means that you must first unlock the bootloader to install the device root, and to do any configuration.

Disclaimer : While AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is still a modest chance that the steps listed here will cause major problems. It is therefore in the interest of the user to follow the instructions very carefully in order to avoid any incident with the device.
Activating and deactivating custom ROM firmware will definitely void your device’s warranty, and AndroidWeblog.com cannot be held responsible for invalid warranties or damaged devices.

Condition

Be sure to check the model number, it should be listed:

  • Samsung Galaxy J5 LTE [Models : SM-J510F, SM-J510G, SM-J510FN, SM-J510Y, SM-J510M, SM-J510GN, SM-J510H, SM-J510MN, SM-J5108, SM-J510UN, SM-J510L, SM-J510S, SM-J510FQ, SM-J510K]

Make sure you read the disclaimer carefully before using your phone regularly and agree to continue taking this risk.

The phone must be 70% charged, otherwise complications may occur during the experiment. Why take the risk of fully charging it.

If you’re going to root your phone or install a custom ROM, it’s a good practice to back up your phone. Back up all your media, like photos, videos, and everything else on your PC, as well as your contacts in the cloud.

You need to enable the USB debugging option by going to Settings, Applications and Developers.

Root downloads Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN Android 10 one UI 2.0

Download the Samsung USB drivers here (if you already have drivers installed on your PC, ignore this).

Download Odin from here.

Download the TWRP repair for the Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN here :

ALWAYS read the Samsung Galaxy S7 SM-G930F/FD/X Root and install TWRP recovery 3.5.0

PAVI 3.5.0 (j5xnlte) [Official PAVI] fix [Samsung Galaxy J5 LTE (2016) (SM-J500F/FN/MN/ GN)].

TWRP 3.5.0 (j5xltecmcc) fix [official TWRP] [CMCC China Samsung Galaxy J5 LTE (SM-J5108)]

Download SuperSU from Chainfire from here.

Download Magisk Manager from here.

unlock Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GNB Android 10 One UI 2.0

Step one: Make sure USB debug mode and OEM unlock are already enabled on your smartphone. To do the same, go to Settings > About > and type in the build number 7 to 10 times in a row, which will activate the USB debug mode and OEM unlock. So clearly, the process is not complicated.

Step two: Then simply turn off your Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN device. Now it’s time to go into boot mode. To enter boot mode, press the Volume + and Volume – keys simultaneously, then connect your smartphone with a USB data cable. When the device enters boot mode and the boot mode screen appears, simply press the volume up key and the Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN boot loader will be unlocked.

Attention: Unlocking the bootloader will erase the user data on your device. After configuring your device, check the OEM unlock settings, in previous cases it will lock again.

Steps to flash/install TWRP 3.5.0 on Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GN Android 10 One UI 2.0

Step one: Suppose you have already downloaded the latest Odin and TWRP recovery for your device from the example area above. If the latest version of Odin does not work on your device or if you are experiencing problems, simply download the correct version of Odin.

Step two: Make sure you have already downloaded TWRP Recovery for your Samsung device. Then unzip the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.

Step three: Once the device is turned off, simultaneously press the Power+Volume Down+Home buttons and the device will enter the boot mode. If this key combination does not work for your device, search Google for this key combination for your device.

Step four. Now connect your Samsung device to your computer using a USB cable. Next, navigate to the folder where the Odin files were extracted and right-click on the Odin executable, then click Run as Administrator.

Step Five: The interface should show something like ID:COM below, and check the interface below carefully.

Step six: Note the ID:COM and the empty field below it, which turns blue once the device has been detected. The device should be detected if the correct drivers are installed on the computer.

ALWAYS pay attention to how you install the X18 Plus MT6750T root and TWRP recovery.

Step seven: Then just click on AP, go to the firmware archive, find the .tar.md5 file and select it after clicking on AP.

Message: There is a PIT zone in the re area. Do not place a file in the PIT section and make sure repartitioning is not enabled. Check the box and place a check next to Auto-restart and F. Reset Time.

Step 8 : Once the TWRP (.img) file is uploaded to the AP field, the flash or installation process can begin. Be careful not to touch the USB cable while it is flashing.

Step 9 : If all goes well, you will see a green PASS or RESET message at the end, indicating that the TWRP firmware process has been successfully completed for your device and it now has a TWRP recovery feature. At this point the device will automatically reboot, don’t panic, that’s normal. You can now disconnect the device from the computer.

Procedurefor root Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GN to Android 10 a UI 2.0/ Magisk or SuperSU install.

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.

Message: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.

Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy J5 LTE (2016) SM-J500E/FN/MN/GN smartphone.

Step two: Now all we have to do is initiate the recovery. You can also backup the ROM through the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can flash the ROM.

Step three: Press Install, then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.

Congratulations, you now have the Samsung Galaxy J5 LTE (2016) SM-J500F/FN/MN/GN Root, as well as the TWRP flasher. You can now install the Xposed Framework and customize your smartphone. If you want to check this, you can download and check the status of the root through the Root Checker program.

twrp j510fn,j5 (2016 xda),odin download,sammobile,twrp s7,twrp s8,twrp samsung j7,twrp recovery img,twrp no root,me twrp twrpapp 18 apk,how to root samsung j5 2015,samsung j5 root apk,root file for samsung j500f,samsung j500f root file 5.1.1 download,how to root samsung j5 without pc,sam j500f root file,magisk for j500f,root samsung j500g,samsung j500h firmware download,samsung sm-j510f/ds firmware download,sm-j510fn 4files firmware download,j510fn firmware 6.0.1 download,samsung j500f 6.0.1 firmware free download,samsung j5 firmware south africa download,Privacy settings,How Search works,sm-j500f twrp recovery download,9.0 pie for sm j500f,samsung sm-j500f rom,j500f twrp 6.0.1 download,j500f nougat firmware download,j500h twrp 6.0 1 download,samsung j5 custom rom,samsung galaxy j5 ios custom rom download

You May Also Like

How to Add Audio to Google Slides? [Step-by-Step Guide]

If you don’t know how to add audio to Google slides, you…

How to draw interactive Polyline on route google maps v2 android –

Development issue/problem: I have the following code that draws polylines for me…

How to Fix Nintendo Switch Error Code 9001-0026

Check the servers Connect your Nintendo account to the Nintendo Switch var…

How To Track An iPhone Without Them Knowing

The iPhone has given viewers more power over how to track iPhones…